Our 10,500 square feet factory unit has a large indoor working area as well as a large concreted yard to the front allowing for easy loading and unloading of large loads.
The purpose-built abrasive cleaning booth is 15m long by 5.5m wide allowing us to carry out works to a wide variety of items ranging from 40 ft articulated lorry trailers, Shipping containers, Structural steels, etc using the more aggressive, harder abrasives to Automotive bodies, Motorcycles, Alloy wheels, Garden furniture, thin sheet mouldings using lower pressure finer grade, softer abrasives.
Randell Industrial have been involved in the Abrasive blast cleaning industry for over 35 years.
In our opinion, there are a great many contributing factors to achieving the correct finish to the substrate without causing any damage i.e. excessive surface profiling, heat warping / distortion etc.
These range from choosing the correct abrasive for the material being blast cleaned, impact angle, blasting pressure, wet or dry blasting media, required surface finish etc.
Each of these points is considered before commencing any works to ensure correct profile is achieved for any subsequent works – powder coating, wet spray, polishing, weld inspection etc.
We use a full range of abrasives ranging from steel grit to provide a coarse anchor pattern for thermal metal spray application and protective coatings down to superfine glass media and soda for delicate substrates such as aluminium and GRP.
Practically anything can be abrasive blast cleaned provided you use the correct equipment and materials to carry out the task in hand.
The abrasive cleaning booth has a very efficient dust extraction system fitted to allow for maximum visibility during the cleaning works.
We also have two large self-contained cabinets that we use when the items need a more delicate touch or are simply too small to use the large blast room. These are particularly useful for the preparation of intricate parts prior to coating or polishing using glass beads.